In offerta!

TRICHORD DIABLO

1.360 1.085

Categorie: ,

Preamplificatore fono per testine MM/MC, componentistica speciale. Disponibile anche con alimentazione Diablo G2NC “Never Connected 2”. Cavo speciale HP per l’interconnessione all’alimentatore opzionale.

Switch Selectable Cartridge Resistance Loading (DIP 1 and 2)
33 ohms For Moving Coil cartridges
100 ohms For Moving Coil cartridges
1,000 ohms For Moving Coil cartridges
47,000 ohms For Moving Magnet and some Moving Coil cartridges

Switch Selectable Capacitance Loading (DIP 1 and 2)
100pF For Moving Magnet and Moving Coil cartridges
1,000pF For Moving Coil cartridges

Please refer to your cartridge specification for correct loading settings.

Switch Selectable Gain (DIP 3 and 4)
Cartridge Type Sensitivity
MC Very Low: 100uV to 250uV (74dB)
MC Low: 250 to 400uV (70dB)
MC Normal: 400uV to 1mV (63dB)
MC High/MM Low: 1 to 3mV (52dB)
MM High: 3 to 5mV (48dB)

RIAA Reproduction Characteristics
20Hz to 20,000Hz +/-0.25dB
Output voltage: 0.5V at 1KHz
Power Supply Requirements
The Diablo can be powered from either an AC or a DC power supply.
AC requirements: two independent supplies of: 0v / 18v ac, 0v / 18v ac.
DC requirements: two independent supplies of: 0v /-22vdc , 0v / +22vdc
To avoid problems only use Trichord power supplies.
Dimensions and Weight
Overall case dimensions for Diablo: 185mm x 58mm x 112mm (D x H x W)
NCPSU: 185mm x 58mm x 112mm (D x H x W)
Standard AC PSU: 85mm x 50mm x 85mm (D x H x W)